A Division of Keith's Power Equipment, Inc.

              

PSS8-12

Winco_Packaged_Standby_PSS8.jpg (7783 bytes)

Power Rating - Continuous Standby (1)   

 PSS8 PSS12

Power Output (60Hz)

    

Voltage

  120/240  120/240

Phase

  Single  Single

Power Factor

  1.0  1.0
Fuel:    

LP

    

kW

  8  12

Amps

  33  50

Natural Gas

    
kW  7.2  9.6
Amps  30  40
Optional Auto Transfer Switch Rating (2)    
Line  110 Amps  110 Amps
Generator  60 Amps  60 Amps
Engine Specifications    
Make/Model B & S Van B & S Van
Rated Power (1) 16 h.p. 23 h.p.
Engine Speed 3600 r.p.m. 3600 r.p.m.
Fuel Consumption    
Full Load – LP Gas (3) 2.7 gal/hr. 2.20 gal/hr.
Half Load – LP Gas (3) 1.7 gal/hr. 1.39 gal/hr.
Full Load – Natural Gas  200 ft3/hr. 195 ft3/hr.
Half Load – Natural Gas  145 ft3/hr. 140 ft3/hr.
Engine Features    
Electronic Ignition Standard Standard
Optional Winco Transfer Switch (4)    
Engine Start/Stop Switch Standard Standard
Exerciser Clock Standard Standard
Generator Data    
Motor Starting Ability (5) 4 h.p. 6 h.p.

Size and Weight

 

 

L x W x H (in.)

35.5x27.5x28.5

44.5x26.5x29.5

Net Wet (lbs.)

420

433

Ship Weight (lbs.)

455

468

Warranty Information

 

 

Engine/Generator

2 yrs/ 1yr

2 yrs/ 1yr

Notes: (1) Derate 3.5% per 1,000 feet elevation above sea level.  (2) Other amperages available, please consult the factory. (3) One gallon of L.P. gas equals 4.23 lbs.   (4) Automatic Transfer Switch is optional.  (5) Code G capacitor start motor.  Standards Compliance: IEEE, NEMA, ANSI.  Start Battery not included.  Installations vary - see dealer for details. (6) Three phase optional, please consult factory

*Units also available in an open configuration.  Consult Keith's Power Equipment Inc.for details.